Sewing Browser tool
Work out waist and hem cutting radii for full, half, and quarter circle skirts. View pattern layouts on folded or split fabric with yardage requirements.
How the waist and hem math works
To find your waist radius, enter your target waist circumference including any wearing ease you like. The calculator divides this waist measurement by 2π (two pi) multiplied by your chosen skirt fullness (full, three-quarter, half, or quarter circle). This gives the exact waist stitching radius.
Your cut waist radius is smaller by the waist seam allowance, moving the cut edge inward. At the bottom, the hem cutting radius simply adds your finished skirt length and hem allowance to that waist stitching radius.
Some patternmakers, such as By Hand London, add side-seam allowance directly to the waist circumference before calculating the radius. This calculator keeps the math clean: it uses your true finished waist for the stitching radius, then adds parallel seam allowances along each panel seam on the layout diagram.
Cutting on the fold versus panels
A full circle skirt can be cut in one piece on a lengthwise fold if your fabric is wide enough. When the radius is wider than your fabric width, split layouts compare rows of two panels, or four panels for a full circle.
The diagram shows the lowest-yardage layout among those options. Even with a folded cut, remember you may still need a closure opening for a zip (zipper) or button placket. Check your pattern’s grain, zipper, and print placement before cutting. Split panels may be turned across the fabric in the estimate. Always allow extra fabric if you need to cut a separate waistband, pocket bags, or lining.
Why you must hang the skirt before hemming
Because a circle skirt curves across the grain, portions of your skirt fall on the true bias. Sections cut on the bias stretch under their own weight. Always assemble your skirt and let it hang freely on a hanger or dress form before hemming. Once the fabric has relaxed and dropped, level the hem and finish it.