Fabric yardage calculator

Cutting layout

Cut pieces and fabric. Your measurements

Enter cut sizes including seam allowances. Cut length follows the length of the fabric when rotation is off.

Piece 1
See cutting layoutcutting layout

This estimates a layout for rectangles. Real layouts and pattern pieces can vary.

Calculated on your device.

Sewing Browser tool

Work out how much fabric to buy for cushions, quilts, and bags. See a visual cutting layout with or without piece rotation in inches or centimetres.

How to measure your pieces

Enter the exact dimensions you plan to cut for each piece, not the finished size. If you are sewing a simple cushion cover or tote bag, add your seam allowances and hem turnings before typing the numbers in.

Measure your usable width between the selvages (selvedges) after pre-washing. For standard 44/45-inch quilting cotton, the Sewing & Craft Alliance suggests about 42 inches of usable width. APQS uses a conservative 40 inches in its binding guide. Our 44/45-inch preset defaults to 42 inches. For wider fabric, the 54-, 60-, and 108-inch presets assume the full listed width is usable. If your measured width differs, choose Custom.

How the cutting layout works

The planner sorts your pieces from tallest to shortest by feasible orientations and arranges them across the fabric width in rows. When you allow piece rotation, it tests two ways to start each row and picks the layout that needs less length.

If your fabric has a directional print, a velvet nap, or a strict grainline, tick the directional box. Every piece will keep its cut length running straight along the fabric length.

Good to know before buying

Fabric totals round up to the nearest eighth of a yard or tenth of a metre. Always buy a little extra beyond that minimum. You will want room for straightening uneven cut ends, shrinkage in the wash, and matching print repeats across seams. Commercial pattern layouts also use angled curves, folded layers, and nesting that differ from simple rectangular cuts.

A few quick answers

Do I need to include seam allowances?

Yes, always enter the full cut size. That means your finished piece plus seam allowances and any hems you plan to fold under.

How do I cut directional prints or napped fabric?

Turn on the directional option. That keeps every piece aligned with the lengthwise grain. Be sure to allow extra fabric if you need to match motifs across seams.

What is usable fabric width?

It is the actual workable fabric between the selvages (selvedges) after pre-washing. Enter your measured width if it differs from the standard presets.