Quilt border calculator

Border cut list

Quilt centre and borders. Your measurements

Measure the unfinished quilt through the middle in both directions.

Border 1
See border cut listborder cut list

Join cross-width strips diagonally, then cut the four lengths. The mitered lengths cover the corner overlap. Allow extra for trimming or pattern matching if needed.

Calculated on your device.

Quilting Browser tool

Plan butted or mitered borders for your quilt top. Calculate strip cut lengths, width-of-fabric strips to cut, total yardage, and final quilt dimensions.

Measuring your quilt centre

Spread your patchwork top flat on a table or the floor. Measure across the centre in both directions, not along the outer edges, which can stretch or wave. Enter the visible width you want for each border, starting from the inner border outward.

The cut strip width adds seam allowances to both long edges. Default allowances are ¼ inch (or 0.75 cm in metric). If you prefer an exact mathematical conversion for a quarter-inch seam, type 0.635 cm. The finished quilt size is calculated to the outer stitching line, leaving seam allowance for your binding.

Butted borders versus mitered borders

For butted (straight) borders, sew the side strips on first. Then cut your top and bottom strips long enough to cross the quilt centre plus both attached side borders.

Mitered cuts extend past all four corners. The cut list adds twice the cut strip width to each centre measurement, using the base geometry from the Quiltscapes guide. Quiltscapes suggests adding at least 2 inches of handling room, while American Patchwork & Quilting adds 6 inches. Add extra fabric if your pattern calls for that allowance, if you are matching motifs, or if you plan to assemble multiple borders as a single mitered unit.

Cutting, joining, and yardage

Cut your border strips across the usable fabric width. Join the strips for each border diagonally before cutting the four lengths. Each diagonal join uses a length equal to one cut strip width. Purchases round up to the next eighth of a yard or tenth of a metre for each border, giving you neat, flat borders without wavy edges.

A few quick answers

How do I measure my quilt for borders?

Lay your pieced top flat and measure across the middle in both directions, never along the outer edges. Measure again before sewing each border tier if the quilt has shifted.

Why do mitered borders need longer strips?

Mitered borders must extend past the outer corners so their ends can meet at an angle. The cut list adds extra length to each strip for trimming.

How much fabric do diagonal strip joins use?

Every diagonal join consumes a length equal to one cut strip width. The calculator allows for that seam loss before calculating how many strips to cut.